langsung ajah ga pake lamaa... itung itung sebagai arsip materi TA saya, langsung deh lampirkan saja
* AP linksys WRT54G
* firmware tomato
1st Router (Main Router with Internet Access)
- WAN port of this router is connected to the Internet.
WAN
(configure normally)
LAN
IP Address = 192.168.1.1
DHCP Server = enabled
Wireless
Wireless Mode = Access Point + WDS
SSID = samessid
Channel = 6
Security = WPA Personal
Encryption = AES
Shared Key = samesharedkey
WDS = Link With
MAC Address = *wireless* MAC address of the 2nd router)
2nd Router ( The repeater Router, No internet access on the router)
-The WAN port of this router is not used.
WAN
Type = Disabled
LAN
IP Address = 192.168.1.2
Default Gateway = 192.168.1.1 (the 1st router's IP address)
Static DNS = 192.168.1.1 (the 1st router's IP address or any DNS server)
DHCP Server = Disabled (the 1st router handles DHCP)
Wireless
Wireless Mode = Access Point + WDS
SSID = samessid
Channel = 6
Security = WPA Personal
Encryption = AES
Shared Key = samesharedkey
WDS = Link With
MAC Address = (the *wireless* MAC address of the 1st router)
joz tenan ^^
